Nitrile Gaskets Nitrile Gaskets


  Nitrle Gaskets Online or Call   714-593-9780
 

Nitrile Gaskets 


  Gaskets
 

Shop for:

AFLAS® Gaskets

Ameri-lon Gaskets

Armstrong Gaskets

Buna Gaskets

Cork Gaskets

EPDM Gaskets

EPTFE Gaskets

Fish Paper Gaskets

Flexible Graphite

Grafoil® Gaskets

Mica Gaskets

Neoprene Gaskets

Nitrile Gaskets

Non-Asbestos Gaskets

PTFE Gaskets

Rubber Gaskets

Silicone Gaskets

Urethane Gaskets

Viton® Gaskets

FKM Gaskets

JM Clipper Gaskets

Durlon Gaskets

Garlock Gaskets

Thermoseal Gaskets

Other Gaskets

  Special Services
  Mechanical Seal Repairs
Gasket Cutting
Die Formed Packing
Die Formed Grafoil
Spiral Wound Gaskets
Custom Stitched Tadpole
CNC Machined PTFE
Molded PTFE
Vulcanized O-Rings


Grafoil® Gasket

Viton® Gasket

Expanded PTFE Gasket Sheeting

PTFE Gasket Material

DX Gasketing Materials

Grafoil® Gasketing Materials

Viton® Gasketing Materials

Rubber gasketing Materials


 

 

Nitrile Gaskets

We cut Nitrile (Buna-N) from any of the following Nitrile gasket materials.

Trade Names:
Chemigum Hycar (Zeo (Goodyear)n Chemical) Ny Syn (Copolymer) Paracril (Uniroyal) Krynac (Polysar) PerNitrilen (Mobay)
The most widely used 0-Ring elastomer. Excellent resistance to petroleum products. Excellent compression set, tear and abrasion resistance. Does not have good resistance to ozone, sunlight, or weather, unless specifically compounded. Should not be stored in direct sunlight or near motors or other electrical equipment which may generate ozone. Temperature range: -40° to +250°F.

STYLE 0726T - Nitrile-N 70 Durometer for Transformer Gaskets and Strip Especially selected for the fabrication of gaskets and strip for transformers. High resistance to transformer oils. Durometer 70±5.

Tensile strength 1500 PSI
Elongation 250%
Temperature range -30°F to 250°F

STYLE 0726H - Nitrile-N 90 Durometer Gaskets Good resistance to many oils and chemicals.
Durometer 90±5:

Tensile strength 1500 PSI.
Elongation 100%.
Temperature range -30°Fto250°F

STYLE 0726W - Nitrile-N White 50-65 Durometer Gaskets

Manufactured from FDA approved ingredients oil resistance to oily and greasy food products. Good resistance to abrasion. Non-toxic and non-marking.
Durometer 55+10/-S.

Tensile strength 1000 PSI
Elongation 400%
Temperature range -20° F to 200° F

cut gaskets

Call us directly or order Nitrile gasket materials online today!
American Seal & Packing (714) 593-9780

When it comes to cutting gaskets there are several ways to get the job done. Traditional "clicker presses" are great for larger quantity jobs and have been the standard in the industry for years. The biggest down side to using clicker presses is tooling must be made to produce a gasket. Just as CNC lathes revolutionized the machining industry, routers and water jet are all computer controled ways of cutting a nitrle gasket with out the need for tooling or dies.

Laser Gasket Cutting

 

Specialized sealing products like Grafoil® flexible graphite, FKM, Ameri-lon®, and more common materials for cut gaskets like: PTFE, filled PTFE, FKM, Viton®, Expanded PTFE, silicone, rubber, buna, EPDM, cork, fish paper, vegetable fiber, and non-asbestos Cut Gaskets.

If you have a cut gasket application that requires more than traditional solutions, let our team of cut gasket professionals help.

Manufacturers we represent

FMI-SPA, Thermoseal, Utex Industries, JM Clipper, Sepco, Pure Flex,  Parker, Leader Gasket.

Though trading partners we can also offer Flexitallic, Garlock, A.W. Chesterton, Durlon, and other major brands.

 

Nitrile Cut Gaskets 

Fills the space between two objects, generally to prevent leakage between the two objects while under compression. Cut Gaskets saves money by allowing less precise mating surfaces on machine parts which can use Cut Gaskets to fill irregularities. Gaskets are commonly produced by cutting from sheet Cut Gaskets, such as gasket paper (beater addition), Non-asbestos, Rubber, EPDM, Nitrile, Buna, Neoprene, Flexible Graphite, Grafoil®, Aflas,Viton®, Silicone, Metal, Mica, EPTFE, Felt or a plastic polymer such as (PTFE), Peek, Urethane, or Ethylene Propylene (EP).  In the past, the Cut Gaskets selected for specific applications may contain have contained asbestos.

It is usually desirable that the gaskets be made from a material that is compressible such that it tightly fills the space it is designed for, including any slight irregularities. The most common misconception when selecting a Cut Gaskets thickness is to choose a Cut Gaskets that is too thick. The thicker the material the more likely the material being contained can weep through the pores of the Cut Gaskets itself. This is a greater issue with some materials than others.  A rule of thumb is to have the material thick enough to compensate for any surface face irregularities and to permit some compression.  The required compression for your Cut Gaskets will depend many factors including:

1)Nitrile Gasket Surface area
2)Pressure being sealed by Nitrile Gasket
3)Size of bolts (assuming bolts are being used)
4)Number of bolts
5)Condition of the bolts
6)Lubrication on the bolts

All must be considered when determining torque.  Torque data must be determined using all of the above and should be provided by an engineer.  In most cases unless your gasket is a standard ANSI or API flange using Ring or Full Face gaskets torque data will be difficult to come by (due to staffing and the fear of law suits).  In most cases the old tighten it tight enough to stop any leaks but not too tight as to completely crush the gasket is generally accepted.

Over compression of Cut Gaskets is a common problem with metal gaskets which have mechanically designed recovery built into the gasket.  Over compression removes the Cut Gaskets ability to recover. This is not true of Nitrile, once compressed it will have recovery and therefore will adapt to maintain a seal. 

The common strategy of "The more compressive load exerted on the gasket, the longer it will last" is generally true of elastomeric materials since elastomers (rubbers) are not compressible but deflect compression. 

One of the more desirable properties of an effective Cut Nitrile Gaskets in industrial applications is the ability to withstand high compressive loads. Most industrial gasket applications involve bolts exerting compression well into the 14 MPa (2000 psi) range or higher. This is why Non-asbestos Cut Gaskets are so widely used in industrial Cut Gaskets applications where a nitrile gasket does not require such load.

American Seal & Packing Cuts Gaskets of all types, Including: PTFE, compressed non-asbestos, vegetable fiber, beater add, cork, and various rubbers - Nitrile, Buna-N, SBR, EPDM, Viton®, FKM, Hypalon, Aflas®, natural rubber, closed cell, open cell, Neoprene, GRAFOIL® Flexible Graphite and other "soft goods". Gaskets can be cut based on your drawing or sample of the gasket you desire. Basic I.D x O.D shapes can be cut by hand however most gaskets require a die. Gasket materials are available in rolls or on pallets depending on type and quantity. Name brands we can provide include; FMI-SPA, Klinger, Johns Manville, RM, Detroit, Utex and GRAFOIL® Flexible Graphite among other gasket styles. So, if you want a cut Nitrle gasket or gasket material so you can cut your own, we can help.

Call us directly or order Nitrile gasket materials online today!
American Seal & Packing (714) 593-9780

 

 

Gaskets

Gasket Material

Metal Gaskets





 

 

 

 

 

Expanded PTFE
Joint Sealant
Strong, Resiliant, Reliable
Call 714-593-9780
Joint Sealant

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Gaskets

 


® 2017 American Seal & Packing, Inc.
GRAFOIL® is a registered trademark of GrafTech International Holdings Inc.
Viton® is a registered trademark of DuPont Performance Elastomers.

American Seal & Packing, Inc., Santa Ana, CA 92705   714-593-9780

A California based, U.S. Supplier of Nitrile Gaskets, Non-Asbestos Gaskets, Ameri-lon Gaskets, Armstrong Gaskets, Buna Gaskets, EPDM Gaskets, EPTFE Gaskets, Fish Paper Gaskets, Flexible Graphite, Grafoil® Gaskets, Cork Gaskets, Mica Gaskets, Neoprene Gaskets, PTFE Gaskets, Rubber Gaskets, Silicone Gaskets, Urethane Gaskets, Viton® Gaskets, FKM Gaskets, Nitrile Gaskets.